DESCRIPTION

This universal single inlet dual outlet electric valved muffler comes with complete electric valve controller and remote kit, offered in 201 or 304 stainless steel material, and supports multiple inlet diameter options for custom exhaust builds.

This valve muffler is widely used for custom catback exhaust modification. Built with electric valve actuator, it allows drivers to switch exhaust sound freely via remote control. Closed valve delivers quiet daily driving tone; open valve unleashes deep, aggressive sport sound. Polished surface finish brings premium visual effect under the car. Multiple pipe diameter options meet different engine displacement and exhaust flow requirements, ideal for custom fabrication on various sedan, coupe and sport vehicles.

VEHICLE FITMENT

Universal fit for custom exhaust fabrication, suitable for most passenger cars and sport cars for custom exhaust build.

KEY FEATURES

• Dual Sound Tone Switch: Easily alternate between an aggressive racing sound and a quiet OEM tone with a single click of the wireless remote.
• Premium Perforated Baffle: Features a high-efficiency perforated internal structure that optimizes backpressure and eliminates annoying drone.
• 100% Stainless Steel Construction: Built with heavy-duty 201/304 material and premium TIG welding for maximum durability and rust resistance.
• Complete Plug-and-Play Kit: Comes fully equipped with a high-torque electric valve motor, receiver control box, and full wiring harness.
• Universal Weld-On Fitment: Designed as a universal modification piece, suitable for a wide range of car makes and models with professional installation.
  

TECH SPECIFICATIONS

• Product Name: Universal Stainless Steel Electric Valved Exhaust Muffler
  
• Internal Structure: Perforated Internal Baffle Design / Multi-Chamber Baffled Core
  
• Valve Type: Electric Motor Driven Valve (Electronic Valve)
• Material: High-Grade 201/304 Stainless Steel 
  
• Control Method: Wireless Remote Control & Complete Wire Harness Kit
  
• Sound Performance: Dual Sound Modes (Aggressive Racing Sound / Quiet OEM Sound)
  
• Working Voltage: DC 12V Universal for Automotive
  
• Fitment Type: Universal Fit for Most Vehicles (Professional Welding Required)
  
• Available Sizes: 2.0" / 2.25" / 2.5" / 3.0"/3.5"Inlet & Outlet
  
• Key Features: Anti-corrosion, Premium TIG Welding, High Temperature Resistance

WHAT'S IN THE BOX

• 2 x Electric Valve Muffler
• 1x Electronic Control Module 
• 1 x Remote Key Fob
• Full Set Wiring Harness & Installation Hardware

Installation Guide & Precautions

1. Mechanical & Welding Safety 

• Professional Installation Required: This is a universal weld-on performance parts. Professional welding (TIG welding highly recommended) and custom piping installation by an experienced exhaust shop are required.
• Clearance Check: Before permanent welding, mock up the muffler under the vehicle to ensure at least 1.5 - 2 inches of clearance from the car body, heat shields, fuel lines, and suspension components to prevent heat damage.
• Flow Direction: Ensure the muffler is oriented in the correct exhaust gas flow direction. Install with the single inlet facing the engine side and the twin outlet facing the rear.

2. Electrical & Wiring Connections 

• Voltage Compatibility: This electronic system is strictly designed for DC 12V automotive electrical systems only. Do not connect to 24V commercial trucks.
  
• Heat & Vibration Protection: Route the actuator wiring harness safely away from high-heat zones (like the exhaust pipes themselves) and moving suspension parts. Secure cables with heat-resistant zip ties.
  
• Waterproof Measures: Although the motor and connectors have basic weather resistance, ensure the control module box is installed in a dry location inside the vehicle (e.g., cabin or trunk) to prevent water ingress.

3. System Testing & Operation

• Pre-Check Before Welding: Connect the control box, wiring, and cigarette lighter/power source before final welding to test if the remote control fully opens and closes the valves smoothly.
  
• Exhaust Gas Seal: Ensure all welded joints are 100% sealed. Any exhaust leaks near the valve mechanism can cause abnormal rattling noises and reduce backpressure efficiency.
  
• Breaking-In Period: It is normal to smell a slight burning odor during the first few miles of driving. This is the protective coating curing inside the new perforated stainless steel baffle core.
  

Trouble-Shooting Guide

1.Valve Not Responding:

• Check if the blue LED indicator on the remote control lights up (replace battery if dim).
• Verify the cigarette lighter power plug or 12V power source is firmly connected and the fuse is intact.

2.Abnormal Rattle or Noise:

• Ensure there is sufficient clearance between the valve actuator motor and the car chassis.
• Check for any pebble or welding slag stuck inside the perforated baffle chamber.

3.Intermittent Signal:

• Do not shield the receiver control box behind heavy metal sheets. Extend the small antenna wire for better wireless reception.

Measurement Confirmation

Measure Before You Buy: Please carefully measure the available space (Length, Width, Height, and Pipe Inlet Diameter) under your specific vehicle before placing an order.
Custom Adjustments: Since this is a universal high-performance baffled muffler, modification shops may need to add extra extension pipes or adjust hanger brackets to fit your unique exhaust layout.